Create a simple sketch to find similar parts
1/5
1
2|1
3
4
4
0
0
0
0
0
0
0
0
0
0
2993974_TWI 4.0322 DM (3~400 V, 50 Hz)
1/5
Produktabbildung
PRODUKTABBILDUNG
Article number
ARTICLE_ID
Type code
ARTICLE_NAME
Manufacturer
MANUFACTURER_NAME
Level Of Detail
LOD
Short text
DESCRIPTION_SHORT
Tender text
DESCRIPTION_LONG
Angle to first bolt hole
A2 [mm]
Thickness flange (incl. sealing edge)
B2 [mm]
Diameter bolt hole
D22 [mm]
Diameter sealing edge
D42 [mm]
Dimensions
DIAMD1 [mm]
1
2
2993974
TWI 4.0322 DM (3~400 V, 50 Hz)
WILO SE
350
Multistage 4" submersible pump in tie strap version for vertical or horizontal installation
Fully submersible, multistage pump for pumping industrial and drinking water (ACS rating) with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically cast with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. The limit values for maximum fluid temperature and minimum flow velocity must be adhered to. Vertical installation is possible with or without cooling jacket. In cases of horizontal installation, a cooling jacket must always be provided . Scope of delivery: *Submersible pump with connection cable and ACS rating *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
90
2993956
TWI 4-0915 DM (3~400 V, 50 Hz)
WILO SE
350
Multistage 4" submersible pump in tie strap version for vertical or horizontal installation
Fully submersible, multistage pump for pumping industrial and drinking water (ACS rating) with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically cast with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. The limit values for maximum fluid temperature and minimum flow velocity must be adhered to. Vertical installation is possible with or without cooling jacket. In cases of horizontal installation, a cooling jacket must always be provided . Scope of delivery: *Submersible pump with connection cable and ACS rating *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
90
| 标准代码 | Sub TWI 4 (RO) |
| 描述 | |
| 公司 | Wilo |
| 上次修改 | 19.05.2025 12:00:53 |
| 单位 |
Sub TWI 4 (RO),,Wilo
CNS
CNSERPBASE Object Properties